1.3–2.0 ATA / ≥93% O₂ / ≤20 dB / AU · NZ · USA · UAE

Commercial hyperbaric chambers for sale in Australia.

Altitude is optional. Wellness isn't.

Commercial hyperbaric chambers from A$11,776 inc GST, plus red light beds & cryotherapy — for sale across Australia & NZ.

Oxivity is the appointed Australian, New Zealand, USA and UAE distributor for the hyperbaric and infrared ranges on this site. Chambers that generate their own oxygen, cool their own cabin and run off a single power point. One engine. One footprint. No cylinders to order, store or run out of.

An Oxivity hyperbaric chamber, door open, cabin lit
2.0ATA maximum
93%O₂ purity ±3%
20 dBIn-chamber noise
82 kgEngine, single unit
Appointed AU, NZ, USA + UAE distributor Genuine equipment & parts Factory-backed warranty Delivered, installed & commissioned No gas cylinders, ever
Oxivity PULSE Studio hot and cold movement capsule

Spotlight · Active recovery

PULSE Studio. Heat, then cold, then move.

An open capsule for yoga and Pilates that alternates infrared heat with cryo cooling, with colour and aroma built in. A class format no one else on your street can run.

  • Power2 kW infrared / 3 kW cryo
  • Screenfrom 10.1″
  • Supply120 / 230 V

Seven product types

Run one. Run both. They work together.

Pressure and radiant heat are not competing purchases. They sell to the same client, fill different parts of the same day, and most recovery floors end up running both — infrared as the volume service, a chamber as the premium one. Start wherever the room and the budget allow, and add the other when you are ready.

Where they go

Twelve places a chamber earns its floor space.

The chamber is the same. What changes is throughput, footprint and the reason your clients say yes. Start with the setting closest to yours.

All solutions →

TRIAD Engine

Three machines, one cabinet.

Most systems on the market ship a compressor, an oxygen concentrator and an air conditioner as three separate boxes joined by hoses. The range we distribute integrates all three into a single 82 kg unit — fewer joints, fewer failure points, and a fraction of the floor.

Compression
Oil-free. The compression process never contacts lubricant, so nothing oily can reach the chamber air.
PUREFLOW PSA
Dual-tower pressure-swing adsorption strips nitrogen from ambient air, holding ≥93% ±3% oxygen continuously. No cylinders.
HYDROCALM climate
Water-cooled rather than refrigerant. A closed 5–10 L loop cools the cabin, the oxygen generator and the engine itself, and drains condensate automatically.
BIOSHIELD IFD
Graphene filtration licensed from Darwin Technology (UK). ≥99.9% elimination of Staphylococcus aureus, PM2.5 held in single digits — a physical process with no chemicals or residue.
FORESTAIR ions
Up to 2,000,000 negative ions per cm³, which is why a session smells like weather rather than plastic.

One cabinet vs three boxes

What integration actually changes on the floor.

On siteOxivity TRIADSeparate-component systems
Units to placeOne — 570 × 520 × 905 mmThree: compressor, concentrator, air conditioner
InstallationPlug in, fill the coolant reservoir, runInterconnect hoses, cabling and drainage between units
Cabin climateActively cooled and dried through the sessionOften unmanaged — cabins warm up in summer
Failure pointsFewer joints and interfaces to leakEvery connection between boxes is a point of failure
Acoustics≤20 dB in-chamber, ≤50 dB at the engineThree motors running independently in the room
Oxygen supplyGenerated on site from ambient airOften cylinder-fed — ordering, storage, handling

From enquiry to first session

Four steps, and we do three of them.

Step 1

Tell us the room

Dimensions, ceiling height, doorway width and how you intend to use it. Ten minutes on a call or a photo of the space is usually enough.

Step 2

We spec it

You get two options that genuinely fit, with the electrical and access requirements set out in writing before you commit to anything.

Step 3

Delivery & commissioning

We position it, connect it, pressure-check it and commission it. You get the documentation pack the same day.

Step 4

Your team runs it

An operational walkthrough covering start-up, session settings, emergency stop and the monthly electrical safety test. Most operators are confident after one session.

Questions

Before you enquire.

The things buyers ask in the first call. There are around thirty more on the Q&A page.

Do you manufacture these chambers yourselves?

No, and we would rather say so plainly. Oxivity is the appointed distributor for this range in Australia, New Zealand, the USA and the UAE. The chambers are built by our manufacturing partner; we selected the range, hold the distribution appointment for it, and are responsible for everything on this side — specification, freight, delivery, installation, commissioning, training, spare parts and support. Everything we supply is genuine factory equipment with factory-backed warranty behind it.

What is the actual difference between a soft-shell and a hard-shell chamber?

Pressure and permanence. Soft-shell FLOW chambers run at 1.5–1.9 ATA, weigh about 30 kg, fit through a standard doorway and can be packed down and moved. Sealed hard-shell CORE, LUME, ARC, CUBOID and AURA chambers reach 2.0 ATA inside a hard vessel with an acrylic viewport, and stay where they are installed. Neither is universally better — it depends on the room, the budget and how the chamber will be used.

Where does the oxygen come from — do I need cylinders?

No cylinders, ever. Every Oxivity chamber generates its own oxygen on site with a dual-tower PSA (pressure swing adsorption) generator that separates oxygen from ordinary room air using a molecular sieve. The two towers alternate — one producing while the other regenerates — so supply stays continuous at ≥93% ±3% for the whole session. Nothing is delivered, stored or handled.

What is involved in installation?

For soft-shell FLOW: unpack, unfold, plug in. For hard-shell chambers: a delivery slot, clear access from the street to the final position, a standard power point on an RCD-protected circuit, and 5–10 litres of purified water for the cooling loop. No plumbing, no gas lines and no plant room. We position, connect, pressure-check and commission the unit, then walk your team through operating it.

How loud is it?

At or below 20 dB inside the chamber, which is quieter than a library, and at or below 50 dB at the engine thanks to acoustic insulation around the compressor. Most clinics run chambers directly alongside consult rooms and class spaces without complaint.

Put a chamber in your room, not a project plan.

Not sure what fits the room? Send us the dimensions and how you'll use it — we'll come back with one recommendation, and why.

Get a recommendation →