Solutions / For home & private residence

A chamber in the spare room, not a project.

No plumbing, no gas lines, no plant room. A power point, ten litres of purified water, and a room you can close the door on.

Oxivity chamber suited to Home & private residence
Appointed AU, NZ, USA + UAE distributor Genuine equipment & parts No gas cylinders Installed & commissioned Australian-based support

The situation

Why this comes up.

Most people assume a home chamber means a renovation. It does not. The whole system is a chamber plus one cabinet — the hard part is choosing the format that suits the room you actually have.

What changes

Four things that make it work here.

Fits a standard room

FLOW packs down to 30 kg and moves through a normal doorway. CUBOID Mini takes a 1400 × 800 mm footprint at full 2.0 ATA.

Nothing to refill

Oxygen is generated from your own room air. There is no cylinder to order, store or run out of.

Quiet enough to sleep in

At or below 20 dB inside — most people nap, read or work through the session.

Start soft, step up later

Many home owners begin on a FLOW unit and move to hard-shell once the routine is established.

Before we deliver

What to have ready.

Short list. We confirm all of it in writing before anything is built or shipped.

01
A room you can close off
02
Standard power point on an RCD-protected circuit
03
5–10 L purified or bottled water for the cooling loop
04
Measure the narrowest doorway on the delivery path

Room layout

Where it goes in the room.

Drawn to scale around the FLOW Recline 70 — Soft-shell · lie-flat · 1.5 ATA · 30 kg. Send us your floorplan and we return it marked up.

600 mm accessFLOW Recline 702200 × 700 mmenginedoor3 m2.4 m
01
A spare bedroom or study — 3.0 × 2.4 m — takes a FLOW Recline 70 and its engine with room to walk around.
02
Chamber on the floor against a wall, head end away from the door; engine beside it on the same power point.
03
Nothing is fixed to the building. Two people can move the whole unit, and it packs down if the room is needed for something else.
04
Measure the narrowest doorway on the delivery path; the packed engine is 420 × 400 × 768 mm.

Worked numbers

What a session costs you.

Indicative only, based on the FLOW Recline 70 at A$11,776 inc GST. Three utilisation cases — pick the one that matches your floor. Excludes GST, staff time and finance; not financial advice.

Conservative Base Strong
Sessions per week235
Sessions per year104156260
Purchase price spread over 5 years, per sessionA$22.65A$15.10A$9.06
Plus power, water, consumables (10%)A$2.26A$1.51A$0.91
All-in cost per sessionA$24.91A$16.61A$9.96
Typical price of a booked session elsewhereA$90A$110A$130
Saved per year versus paying elsewhereA$6,769A$14,569A$31,209
How to read it

Cost per session spreads the purchase price over five years of use at the stated frequency, plus a 10% allowance for electricity, purified water and filters. There are no cylinder deliveries in the number — the engine generates its own oxygen from a standard power point. Staff time, finance costs and GST are yours to add.

Typical fit-out

What it looks like in practice.

An illustrative scenario for this setting — not a named client. We walk through real installations on the call.

Book a walkthrough →

A household that has been paying for studio sessions puts a FLOW Recline 70 in the spare room. Delivery, set-up and operator training take an afternoon. The purchase price is recovered against the cost of studio visits inside the first year at three sessions a week, after which each session costs little more than the electricity.

  • Recommended chamberFLOW Recline 70
  • Room drawn above3 × 2.4 m
  • ServicesOne power point · no gas cylinders
  • Installed & commissionedBy Oxivity, operators trained at handover

Tell us the room. We'll tell you the chamber.

Not sure what fits the room? Send us the dimensions and how you'll use it — we'll come back with one recommendation, and why.

Get a recommendation →