Solutions / For franchise & multi-site groups
One spec. Every site. One spare-parts list.
Rollouts fail on variation. The FLOW, CORE, LUME, CUBOID and AURA chambers all run the same TRIAD engine, so one technician, one training module and one parts kit cover the bulk of a network.
The situation
Why this comes up.
Multi-site operators end up with three generations of equipment from two suppliers, each with its own procedure and consumables. Standardising on one engine platform makes training, servicing and stock a single problem instead of a per-site one.
What changes
Four things that make it work here.
One engine, nearly every format
FLOW, CORE, LUME, CUBOID and AURA all run the same TRIAD platform, so staff learn one system. The ARC Seat and ARC Seat Pro carry their own integrated plant and are serviced separately — tell us if a single platform across every site matters more than the ARC footprint.
One operating procedure
A single SOP and training module works across every site regardless of which chamber format that site chose.
Format flexibility per site
Corner-fit ARC Studio where floorplan is tight, AURA where the site is a flagship — without changing the underlying platform.
Staged rollout
Pilot a site, prove utilisation, then scale. Talk to us about sequencing before you commit the network.
Recommended
Start here.
One recommendation, then the two we'd compare it against. Send us the room and we'll confirm.
CORE Solo
Most franchise groups start here. It is the unit we can supply, install and support consistently across sites, which matters more than any single spec when you are opening more than one room.
Full specification →CORE Solo
Sealed hard-shell · seated · 1 person · 2.0 ATAThe classic clinic width and the quietest platform we stock. A panoramic port, a touch console, and a door a client opens themselves.
- Chamber 2000 × 980 × 1700 mm
- Engine 570 × 520 × 905 mm · 82 kg
ARC Studio
Sealed hard-shell · seated · 1 person · 2.0 ATAA triangular footprint designed to take the corner of a room instead of the middle of it. The only true corner-fit chamber on either factory list.
- Chamber 1850 × 880 × 1520 mm
- Engine 590 × 520 × 903 mm · 82 kg
AURA Solo
Sealed hard-shell · vertical capsule · 1 person · 2.0 ATAThe full-width flagship for one. The unit clients photograph and post before they have finished the session.
- Chamber 1780 × 1352 × 1808 mm
- Engine 800 × 410 × 870 mm · 100 kg
We carry far more than this. Three is deliberate — past three, buyers stop choosing and start shrinking the order. Tell us the room and we'll widen it if none of these fit. See the full range.
Before we deliver
What to have ready.
Short list. We confirm all of it in writing before anything is built or shipped.
- 01
- A pilot site with representative floorplan
- 02
- A network-wide electrical standard
- 03
- A nominated national operations contact
- 04
- Agreed SOP and training rollout schedule
Room layout
Where it goes in the room.
Drawn to scale around the CORE Solo — Sealed hard-shell · seated · 2.0 ATA · 330 kg. Send us your floorplan and we return it marked up.
- 01
- One room spec for every site: 3.2 × 2.7 m, lockable, standard RCD-protected power point, purified water storage. Sites that cannot meet it get the CUBOID Mini spec instead.
- 02
- CORE Solo on the long wall, engine beside it, operator chair at the console — drawn once, reused on every floorplan.
- 03
- One spare-parts list, one SOP, one training module, one national service contact.
- 04
- Pilot site first; the rollout schedule follows the pilot's first 90 days.
Worked numbers
What one chamber returns.
Indicative only, based on the CORE Solo at A$62,788 inc GST. Three utilisation cases — pick the one that matches your floor. Excludes GST, staff time and finance; not financial advice.
| Conservative | Base | Strong | |
|---|---|---|---|
| Sessions per week | 18 | 30 | 42 |
| Price per session | A$90 | A$110 | A$130 |
| Revenue per month | A$7,020 | A$14,300 | A$23,660 |
| Less power, water, consumables, cleaning (10%) | −A$702 | −A$1,430 | −A$2,366 |
| Net contribution per month | A$6,318 | A$12,870 | A$21,294 |
| Months to recover the purchase price | 9.9 | 4.9 | 2.9 |
| Net contribution over 5 years | A$316,292 | A$709,412 | A$1,214,852 |
Base case assumes the room is used a few hours a day, six days a week. The 10% allowance covers electricity, purified water, filters and clean-down; the engine runs from a standard power point and generates its own oxygen, so there are no cylinder deliveries in the number. Staff time, finance costs and GST are yours to add.
Typical fit-out
What it looks like in practice.
An illustrative scenario for this setting — not a named client. We walk through real installations on the call.
A recovery-studio group pilots a CORE Solo in its best-performing site, using the room drawing above as the network standard. After 90 days the spec, SOP and pricing are locked, and the remaining sites are fitted out in order of trade-area strength, each on the same spare-parts list and service agreement.
- Recommended chamberCORE Solo
- Room drawn above3.2 × 2.7 m
- ServicesOne power point · no gas cylinders
- Installed & commissionedBy Oxivity, operators trained at handover
Other settings
Closer to something else?
Recovery studios
Contrast therapy brought them in. A chamber is what keeps the membership climbing — a book…
Read →Gyms & HYROX
Members already train hard. What they buy next is the thing that helps them keep showing u…
Read →Wellness & longevity
Longevity centres are judged on the calibre of the equipment in them. A chamber is the pie…
Read →Allied health
A chamber occupies one room, runs on one power point and takes a booked appointment — the …
Read →Tell us the room. We'll tell you the chamber.
Product pages
SOLIS red light bed · EMBER red light panel · POLAR Walk-in E cryo chamber · HAVEN Halo longevity capsule · PULSE Run treadmill pod · PULSE Climb stepper pod · All 21 hyperbaric chambers
Buyer guides
Chamber prices 2026 · Soft vs hard shell · 1.3 vs 2.0 ATA · Starting a hyperbaric business · Red light bed guide · All guides